CAST BELLOW SEAL GATE VALVE, FLANGED ENDS (150#)

DN 50 - DN 300
150#
  C.S S.S Low temp.
T min. -29°C -29°C -29°C
T max. +425°C +538°C +345°C

Available on request :

  • Special Corrosion resistant materials for :
    Complete Valve, Bellows and Trim
  • Optional Actuator/Gear Operator.
  • Optional Flanged end with large groove, large tongue and RTJ end.
  • Optional valves with CE and API 6D markings.
  • Optional valve with High Pressure Ratings.



Component Materials
C.S S.S Low temp.
CBGT - F - CS CBGT - F - SS CBGT - F - LT
Body, Bonnet &
Cylinder
WCB CF8M / CF8 LCC / LCB / LC3
Wedge WCB + HF CF8M / CF8 + HF LCC / LCB / LC3 + HF
Seat Ring WCB + HF CF8M / CF8 + HF LCC / LCB / LC3 + HF
Bellow SS3 16Ti / SS321 SS3 1 6Ti / SS321 SS316Ti / SS321
Top/Bottom
Bellow collar
SS316 / SS321 SS316 / SS321 SS316 / SS321
Stem SS410 SS316 / 304 SS304
Gland Bush SS410 SS316 / 304 SS304
Gland Flange Carbon Steel SS316 / 304 SS304
Packings Graphite / PTFE
Yoke Sleeve SG Iron/NI Resist / 416*
Hand Wheel Cast Iron
Hand Wheel Nut Carbon Steel SS304 SS304
Yoke Nut SS410 SS304 SS304
Fastners A193 Gr.B7/A 194
Gr.2H
A193 Gr.B8/A 194 Gr.8 A 320 Gr.L7/A 194 Gr.7
Eye Bolt/ Nut Carbon Steel SS316 / 304 SS304

* Available on request

Testing Pressure in bar (API 598) :

Materials WCB &
LCC/LC3
CF8M /CF8 LCB
HYDRO SHELL 30 29 28
SEAT 22 21 21
AIR SEAT 07 07 07

Dimensional Details :

DN L H
closed
ØD ØC Cv Weight
(approx.)
[mm] [mm] [mm] [mm]   [kgs]
50 178 663 200 50.8 260 40
65 190 698 200 63.5 420 60
80 203 875 250 76.2 625 80
100 229 1075 300 101.6 1150 120
125 254 1315 300 127   170
150 267 1445 300 152.4 2650 200
200 292 1880 350 203.2 4850 360
250 330 2070 500 254 7750 375
300 356 2340 500 304.8 11500 800

Cast Bellow Seal Gate Valve, with flanges acc. to ASME B 16.5, face to face as per ASME B16.10 and with ACME stem screw thread and grounded shaft. Multiply bellow with long service life made of stainless steel.Min. life cycle of Bellow tested for 10,000 cycles, metal back seat, safety stuffing box packing made of pure graphite/PTFE, spiral wound bonnet gasket made of stainless steel with graphite or PTFE filler material, housed in a tongue and grooved flange.

Carbon steel : Body and Bonnet made of cast material WCB, seat ring hardfaced with stellite, wedge made of SS 410/WCB, hardfaced with stellite.
Stainless steel : Body and Bonnet made if cast material CF8M/CF8, seat ring hardfaced with stellite, wedge m ade o f C F8M/CF8, hardfaced with stellite.
Low temperature carbon steel : Body and Bonnet made of cast material LCC/LCB/LC3,seat ring hardfaced with stellite, wedge made of LCC/LCB/LC3, hardfaced with stellite.