ALL WELDED FORGED BELLOW SEAL GLOBE VALVE,
SOCKET WELD ENDS

DN 15 - DN 50
150# / 300#
  C.S S.S Low temp.
T min. -29°C -29°C -29°C
T max. +425°C +538°C +425°C

Available on request :

  • Special Corrosion resistant materials for :
    Complete Valve, Bellows and Trim
  • Soft sealing and regulating disc, needle type disc.
  • Optional Bolted Bonnet.
  • Optional FullPort design upto DN25.
  • Optional Screwed End (BSP/NPT) and Butt Weld End.
  • Optional valve with CE marking size above DN25.
  • Optional valve with High Pressure Ratings.



Component Materials
C.S S.S Low temp.
FBGL - S - CS FBGL - S - SS FBG - S - LT
Body & Bonnet A105 F316 / F304 LF2
Plug SS410 + HF SS316 / 304 + HF SS304 + HF
Integral Seat A105 + HF F316 / F304 + HF LF2 +HF
Bellow SS316Ti / SS321 SS316Ti / SS321 SS316Ti / SS321
Top/Bottom
Bellow collar
SS316 / SS321 SS316 / SS321 SS316 / SS321
Stem SS410 SS316 / 304 SS304
Hand Wheel Nut Carbon Steel SS304 SS304
Gland Bush SS410 SS316 / 304 SS304
Gland Flange CS / A105 SS316 / 304 SS304
Packings Graphite / PTFE
Yoke Sleeve SG Iron/NI Resist / 416*
Eye Bolt/Nut Carbon Steel SS 316 / 304 SS304
Hand Wheel Cast Iron / MI*
Cylinder A106 Gr. B A312 TP316 / 304 A312 TP304

* Available on request

Testing Pressure in bar (API 598) :

Materials A105 & LF2 F316/F304
150# 300# 150# 300#
HYDRO SHELL 30 77 29 75
SEAT 22 57 21 55
AIR SEAT 07 07 07 07

Dimensional Details :

DN L H
closed
ØD ØC Cv Weight
(approx.)
[mm] [mm] [mm] [mm]   [kgs]
15 86 200 100 9 2.5 2.5
20 92 210 100 12 3.5 2.5
25 106 220 100 17 6 4
32 130 290 150 23 12 7.5
40 130 300 150 25 12 8
50 145 315 150 30 28 13.5

Forged Bellow Seal Globe Valve, with socket weld end acc.to ASME B 16.11 (Optional:butt weld end acc. to ASME B 16.25/ screwed end acc. to ASME B 1.20.1), end to end as per manufacturers std. and with ACME stem screw thread and grounded shaft. Multiply bellow with long service life made of stainless steel. Min. life cycle of Bellow tested for 10,000 cycles, metal back seat, safety stuffing box packing made of pure graphite/PTFE.

Carbon steel : Body and Bonnet made of forged material A 105, seat hardfaced with stellite, disc with conical plug made of stainless steel SS 410, hardfaced with stellite.
Stainless steel : Body and Bonnet made of forged material F316/F304, seat hardfaced with stellite, disc with conical plug made of stainless steel SS 316/SS 304,hardfaced with stellite.
Low temperature carbon steel : Body and Bonnet made of forged material A 350 GR LF2, seat hardfaced with stellite, disc with conical plug made of LF2/SS 304, hardfaced with stellite.